🧪 Civil Engineering MCQ Quiz Hub

1. Wright brothers flew the first power driven plane in
1833
1853
1901
1903

2. In helicopters landing and take-off area should be marked as H with the size
2 to 3.5 m height and 3 to 4.5 m width
3 to 4.5 m height and 2 to 3.5 m width
3 to 4.5 m height and 2 to 3.5 m width
2 to 3.5 m height and 1 to 2 m width

3. All markings on the runway are
Black
Yellow
Red
White

4. Length of free area beyond runway in any port should be at least
20 m
60 m
80 m
100 m

5. Required width for taxing in A and B type airports is
7.5 m
15.0 m
20.5 m
22.5 m

6. For supersonic jets, turning radius of taxiway required is a minimum of
100 m
120 m
140 m
180 m

7. In aprons aircraft are parked in
Angle nose out
Angle nose in
Angle nose in
Any of the above

8. Length of STOL ports runway should be
400 m
500 m
600 m
800 m

9. Covered area provided for servicing and repairs of aircraft is known as
Building area
Apron
Hanger
None of the above

10. For D and E type airports ICAO recommends that the sight distance at a height of 2.1 m should be at least
200 m
250 m
300 m
400 m

11. The capacity of parallel runway pattern depends upon
lateral spacing between two runways, weather conditions and navigational aids available
lateral spacing between two runaways and navigational aids available
lateral spacing between two runways and weather conditions
weather conditions and navigational aids available

12. Which of the following is used for servicing and repairs of the aircraft?
holding apron
apron
hanger
terminal building

13. The landing area required for multi engine helicopters is
22.5 x 22.5 m
30 x 60 m
60 x 120 m
60 x 180 m

14. International Civil Aviation Organization (ICAO) was established in
1940
1944
1954
1964

15. The distance of check in point in a terminal from the road transportation should not be more than
20.5 m
22.5 m
27.5 m
37.5 m

16. The periphery of landing and take-off area of heliports should be lighted with amber lights of medium intensity, spaced at
5 m
6 m
7.5 m
10 m

17. As per ICAO recommendation, minimum width of safety area for instrumental runway should be
78 m
100 m
150 m
300 m

18. According to ICAO, all markings on the runways are
red
black
white
yellow

19. For supersonic transport aircraft, the minimum turning radius of taxiway is
60 m
100 m
120 m
180 m

20. The main disadvantage of nose out parking pattern in apron is
overall apron area required is more
hot blast is directed towards the terminal building
rear loading door is far away from terminal building
All of the above